Pitch Diameter Gages – Straight

Pitch Diameter for Straight Threads, 0″ to 72″ Diameters

Pitch Diameter is one of the most important inspections for nearly any thread. In the past, pitch diameter was ignored as long as the ring or plug gage threaded. Now, using Gagemaker gages, you have more control over threading connections of marginal quality. The process of locating and measuring the pitch diameter takes less than a minute. This minute of inspection quickly decides the difference between good and bad.

Gagemaker pitch diameter gages, commonly known as ball PD gages, verify that your part is within allowable tolerances. Improperly sized pitch diameters compromise the load capacity of your threaded components. The ball pitch diameter gages indicate the pitch diameter size of the product’s external and internal threads. The gages are adjustable within a size range and use interchangeable contact points to measure different thread forms and pitches. Setting dimensions for the pitch diameter gages are provided by the TDWIN Thread Disk software.

External Pitch Diameter (0″ to 72″ Diameters)

The ball pitch diameter gages or “GO/NO GO” gages indicate the pitch diameter size of the product’s external thread. The gages are adjustable within a size range and use interchangeable contact points to measure different pitch threads.

PD-8016-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 60" - 72"(1524 mm - 1828.8 mm)60" - 72"(1524 mm - 1828.8 mm)1/2".0001"

PD-8002-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 6" - 12"(152.4 mm - 304.8 mm)6" - 12"(152.4 mm - 304.8 mm)1/2".0001"

PD-8015-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 52" - 60"(1320.8 mm - 1524 mm)52" - 60"(1320.8 mm - 1524 mm)1/2".0001"

PD-8014-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 44" - 52"(1117.6 mm - 1320.8 mm)44" - 52"(1117.6 mm - 1320.8 mm)1/2".0001"

PD-8013-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 36" - 44"(914.4 mm - 1117.6 mm)36" - 44"(914.4 mm - 1117.6 mm)1/2".0001"

PD-8012-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 28" - 36"(711.2 mm - 914.4 mm)28" - 36"(711.2 mm - 914.4 mm)1/2".0001"

PD-8010-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 24" - 28"(609.6 mm - 711.2 mm)24" - 28"(609.6 mm - 711.2 mm)1/2".0001"

PD-8008-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 20" - 24"(508 mm - 609.6 mm)20" - 24"(508 mm - 609.6 mm)1/2".0001"

PD-8006-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 16" - 20"(406.4 mm - 508 mm)16" - 20"(406.4 mm - 508 mm)1/2".0001"

PD-8004-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 12" - 16"(152.4 mm - 406.4 mm)12" - 16"(152.4 mm - 406.4 mm)1/2".0001"

PD-8001-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 0 - 6"(0 mm - 152.4 mm)0 - 6"(0 mm - 152.4 mm)1/2".0001"

PD-8000-1Gagemaker - External pitch diameter gage for straight threads with high resolution indicator - 0 - 2 3/8"(0 mm - 152.4 mm)0 - 2 3/8"(0 mm - 152.4 mm)1/2".0001"

PD-8016 Gagemaker - External pitch diameter gage for straight threads - 60" - 72"(1524 mm - 1828.8 mm)60" - 72"(1524 mm - 1828.8 mm)1/2".0005"

PD-8002 Gagemaker - External pitch diameter gage for straight threads - 6" - 12"(152.4 mm - 304.8 mm)6" - 12"(152.4 mm - 304.8 mm)1/2".0005"

PD-8015 Gagemaker - External pitch diameter gage for straight threads - 52" - 60"(1320.8 mm - 1524 mm)52" - 60"(1320.8 mm - 1524 mm)1/2".0005"

PD-8014 Gagemaker - External pitch diameter gage for straight threads - 44" - 52"(1117.6 mm - 1320.8 mm)44" - 52"(1117.6 mm - 1320.8 mm)1/2".0005"

PD-8013 Gagemaker - External pitch diameter gage for straight threads - 36" - 44"(914.4 mm - 1117.6 mm)36" - 44"(914.4 mm - 1117.6 mm)1/2".0005"

PD-8012 Gagemaker - External pitch diameter gage for straight threads - 28" - 36"(711.2 mm - 914.4 mm)28" - 36"(711.2 mm - 914.4 mm)1/2".0005"

PD-8010 Gagemaker - External pitch diameter gage for straight threads - 24" - 28"(609.6 mm - 711.2 mm)24" - 28"(609.6 mm - 711.2 mm)1/2".0005"

PD-8008 Gagemaker - External pitch diameter gage for straight threads - 20" - 24"(508 mm - 609.6 mm)20" - 24"(508 mm - 609.6 mm)1/2".0005"

PD-8006 Gagemaker - External pitch diameter gage for straight threads - 16" - 20"(406.4 mm - 508 mm)16" - 20"(406.4 mm - 508 mm)1/2".0005"

PD-8004 Gagemaker - External pitch diameter gage for straight threads - 12" - 16"(304.8 mm - 406.4 mm)12" - 16"(304.8 mm - 406.4 mm)1/2".0005"

PD-8001 Gagemaker - External pitch diameter gage for straight threads - 0 - 6"(0 mm - 152.4 mm)0 - 6"(0 mm - 152.4 mm)1/2".0005"

PD-8000 Gagemaker - External pitch diameter gage for straight threads - 0 - 2 3/8"(0 mm - 60.325 mm)0 - 2 3/8"(0 mm - 60.325 mm)1/2".0005"

     Sowant precision gage co.,ltd is a leader supplier of Acme thread gages and API thread gages include BCSG thread gages,CSG thread gages,UPTBG thread gages,NC thread gage,REG thread gages , we have large Acme thread ring and plug gages in stock, for example all acme thread plug gages produced by asme b1.5 ,it is the same with UAS made, but Acme thread ring is a little different from USA made, so when we export Acme thread ring gages, all export gages made by UAS standard asme b1.5, Stub acme by ASME B1.8